SunFounder Raspberry Pi Starter Kit with Detailed Tutorials Compatible with Raspberry Pi 4B 3 B+ 400, Support Python C, Learn Electronics and Programming for Raspberry Pi Beginners
$49.95 - $46.99
(as of May 18,2021 13:20:34 UTC – Details)
SunFounder Da Vinci Kit supported Raspberry Pi 4 Model B, 3 Model A+, 3 Model B+, 3 Model B, 2 Model B, 1 Model B+, 1 Model A+, zero W and zero. This kit contains 2 detailed PDF tutorials, one (Tutorial.pdf) using C and Python, another (Processing.pdf) using Raspberry Pi 4. When you receive the item, please check whether the quantity of components is compliance with product description and whether all components are in good condition. If it’s not th same as the list, please contact our seller.
Da Vinci Kit is a basic kit suitable to intelligent beginners who have project schedule. It contains 26 commonly used input and output components and modules and a number of basic electronic devices (such as resistors, capacitors) which can provide powerful assistance in your programming learning.
In the light of the kit, you can learn some basic knowledge on Raspberry Pi, including the installation method of Raspberry Pi, knowledge of Bash shell and GPIO. Having understood these knowledge, you can start programming.
40 lessons for reference and learning provided,including 36 basic I/o lessons and 4 simple practical examples. It should be noted that the arrangement of these courses is not based on the degree of difficulty, but on the functions in practice. You can find corresponding courses in accordance with your needs.
SunFounder is a company focused on STEAM education with products like open source robots, development boards, STEAM kit, modules, tools and other smart devices distributed globally.
If you have any TECHNICAL question, add a topic under FORUM section on our website and we’ll reply as soon as possible.
For NON-TECH questions like order and shipment issues, please send an email to our service email. You’re also welcomed to share your projects on FORUM.
About SunFounder Davinci Kit
SunFounder Da Vinci kit applies to the Raspberry Pi 4 Model B, 3 Model A+, 3 Model B+, 3 Model B, 2 Model B, 1 Model B+, 1 Model A+, zero W and zero.
40 Projects for Raspberry Pi beginners.
Including various components and chips that can help to create various interesting phenomena which you can get via some operation with the guidance of experiment instructions.
Using the components and chips of the Kit, you can create different scenes and phenomena and explore more application by yourself.
In this project, LCD, buzzer and ultrasonic sensors are used to make a reverse assist system. You can put it on the remote control vehicle to simulate the actual process of reversing the car into the garage.
The keypad and the LCD can be used to make a combination lock. The LCD will display a corresponding prompt for you to type your password on the Keypad. If the password is input correctly, “Correct” will be displayed.
PIR can sense the movement of pedestrians. Used with servos, LED, buzzer,it can simulate the work of the sensor door of the convenience store. When the pedestrian appears within the sensing range of the PIR, the indicator light will be on, the door will be opened, and the buzzer will play the opening bell.
40 Projects for beginners
Lesson 1 Blinking LED
Lesson 2 RGB LED
Lesson 3 LED Bar Graph
Lesson 4 7-segment Display
Lesson 5 4-Digit 7-Segment Display
Lesson 6 LED Dot Matrix
Lesson 7 I2C LCD1602
Lesson 8 Active Buzzer
Lesson 9 Passive Buzzer
Lesson 10 Motor
Lesson 11 Servo
Lesson 12 Stepper Motor
Lesson 13 Button
Lesson 14 Slide Switch
Lesson 15 Relay
Lesson 16 Potentiometer
Lesson 17 Keypad
Lesson 18 Joystick
Lesson 19 Photoresistor
Lesson 20 Thermistor
Lesson 21 DHT-11
Lesson 22 PIR
Lesson 23 Ultrasonic Sensor Module
Lesson 24 MPU6050 Module
Lesson 25 MFRC522 RFID Module
Lesson 26 Tilt Switch
Lesson 27 Simple practical examples 1
Lesson 28 Simple practical examples 2
Lesson 29 Simple practical examples 3
Lesson 30 Simple practical examples 4
Lesson 31 Counting Device
Lesson 32 Smart Fan
Lesson 33 Battery Indicator
Lesson 34 Motion Control
Lesson 35 Overheat Monitor
Lesson 36 Alarm Bell
Lesson 37 Morse Code Generator
Lesson 38 GAME– Guess Number
Lesson 39 GAME– 10 Second
Lesson 40 GAME– Not Not
PROGRAMING LANGUAGES SUPPORT: C Code, Python Code(compatible with 2&3) are provided to learn raspberry pi for beginners
26 MODULES: There are 26 commonly used input and output components and modules and some basic electronic devices which can provide powerful assistance in programming learning.
40 PROJECTS PROVIDED: This Kit provides you with 40 lessons for reference and learning, including 36 basic I/o lessons and 4 simple practical examples.
331 PAGES DETAILED MANUAL (include basic electronics knowledge) and complete code. More details, please check the CD or visit the link on the CD to download.
COMPATIBLE MODELS: Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT included in this kit),